New Holland WorkMaster 50 Service Manual page 271

Non-powered front axle - Remove
DANGER
Heavy objects!
Lift and handle all heavy components using lifting equipment with adequate capacity. Always support
units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders.
Failure to comply will result in death or serious injury.
Remove the front axle assembly from the tractor as fol-
lows:
1. Open and raise front hood.
2. Disconnect the negative cable from the battery and in-
sulate.
3. Safely block rear wheels.
4. Remove front weights and weight support, where fitted.
5. Jack up front tractor and place a stationary stand (1)
under the sump.
6. Loosen retaining bolts (1) and remove the front wheels.
7. Remove knuckle joint nut (1) and disconnect drag link
(2) from control lever.
Front axle system - Non-powered front axle
47866583_ 02/12/2015
25.5 [25.400] / 8
D0076A
1
GNIL14TR04434AB
2
GNIL14TR04435AB
3
GNIL14TR04436AB