4. 1. Remove draft control lever hub by loosening set
screws (1) along with the nylon washer.
2. Remove sector plate.
5. Draft control lever is welded on draft control shaft. Re-
move the position control shaft and draft control shaft
to remove the draft control lever internal linkages.
1. Remove set screw.
2. Remove linkages from the shafts.
NOTE: Remove hydraulic linkages to remove set screw.
6. Remove set screw (1) to remove shaft.
Hydraulic systems - Hydraulic hand control
47866583_ 02/12/2015
35.6 [35.355] / 6
4
GNIL14TR04613AB
5
GNIL14TR04614AB
6
GNIL14TR04615AA