New Holland WorkMaster 50 Service Manual page 341

5. Push out roll pin (1) and remove main PTO lever (2)
from the shaft.
6. Loosen set screw (1) and remove plate.
7. Remove roll pin holding differential lock fork (1) and
PTO coupler fork.
8. Remove the differential pedal lever (2) by unscrewing
two bolts (3) securing the bracket.
Power Take-Off (PTO) - Rear mechanical control
47866583_ 02/12/2015
31.1 [31.101] / 8
4
GNIL14TR04303AB
5
GNIL14TR04304AB
6
GNIL14TR04305AB
7
GNIL14TR04307AB