New Holland WorkMaster 50 Service Manual page 87

8. Remove split pin (1).
9. Disconnect linkage (2) from clutch cross shaft.
10. Similarly remove brake pedal spring (2) and discon-
nect all the linkages.
11. Jack-up rear left-hand side of tractor and remove
left-hand side rear wheel.
12. Pull out clutch or brake pedal support rod (1) from
the rear axle housing.
13. Retrieve clutch pedal (2) from the support shaft.
Clutch - Clutch mechanical release control
47866583_ 02/12/2015
18.1 [18.100] / 4
4
GNIL14TR00781AA
5
GNIL14TR00782AA
6
GNIL14TR04667AB
7
GNIL14TR04668AB