New Holland WorkMaster 50 Service Manual page 106

Clutch - Inspect
1. Check clutch driven discs for wear and replace if rivets
(2) are near or flush with top facing.
2. Discs are also to be replaced if the organic facings are
found to be soaked with oil.
3. Check condition of clutch housing and pressure plate
friction surfaces. If necessary dress noting that dimen-
sions of pressure plates and clutch housing must not
be reduced below the limits described below otherwise
replace as necessary.
Clutch - Clutch and components
1
20097548
47866583_ 02/12/2015
18.2 [18.110] / 13