New Holland WorkMaster 50 Service Manual page 296

Rear bevel gear set and differential - Remove
Crown wheel and differential housing
To remove the crown wheel and differential housing,
final drive housing, brake assembly and Power Take-Off
(PTO) assembly has to be removed.
Remove the rear axle housing as follows:
1. Detach the negative cable (1) from the battery and in-
sulate.
2. Disconnect the electrical couplings (1).
3. Detach electric connections (1) between left and right-
hand side fenders.
Rear axle system - Rear bevel gear set and differential
47866583_ 02/12/2015
27.2 [27.106] / 7
1
GNIL14TR00784AA
2
GNIL14TR00797AA
3
GNIL14TR04245AB