New Holland WorkMaster 50 Service Manual page 521

Steering cylinder - Overhaul
Seeger (5 and 7 also)
1.
2. Assembled rod
3. Piston
4. Lock nut
1. Fix the body taking care not to scratch it.
2. Push the rod to the end of the stroke (in the welded
side).
3. Use the seeger clamp to remove the head seeger.
4. Use the head bell and the plastic hammer to push the
head inside the body 20.00 - 30.00 mm (0.79 - 1.18 in).
Steering - Cylinders
1
GNIL14TR04546FB
5. Ball joint
6. Head
7. Nut
8. Seal kit
47866583_ 02/12/2015
41.4 [41.216] / 4
2
GNIL14TR04548AA