New Holland WorkMaster 50 Service Manual page 278

Axle wheel hub - Remove
WARNING
Avoid injury!
Handle all parts carefully. Do not place your hands or fingers between parts. Use Personal Protec-
tive Equipment (PPE) as indicated in this manual, including protective goggles, gloves, and safety
footwear.
Failure to comply could result in death or serious injury.
Wheel hubs can be removed with the front axle on the
tractor. Proceed as follows for each hub.
1. Safely block rear wheels.
2. Jack up front tractor and place a stationary stand (1)
under the sump.
3. Loosen retaining bolts and remove front wheels.
4. Remove wheel hub bearing grease cup (1).
5. Remove split pin (1).
Front axle system - Non-powered front axle
47866583_ 02/12/2015
25.5 [25.400] / 15
W0208A
1
GNIL14TR04439AB
2
GNIL14TR04440AB
3
GNIL14TR04441AB