DTC 256-03-Engine speed limitation via fuel injection cut off is
active
Control Module : ECU
Context:
The Engine Control Unit (ECU) A-9000 will perform an injection cut-off to limit the engine speed to a controllable range,
if needed. Implausible signals from certain parameters such as accelerator pedal signal, fuel injection parameters
or engine speed can cause an injection cut-off. If torque or injection quantity are not plausible and engine speed is
greater than 1200 RPM, this fault will occur. Other active faults may have caused this fault to occur.
Solution:
1. Check the ECU A-9000 for the appropriate software and re-flash, if necessary.
A. If the fault has been resolved, return the machine to service.
B. If the fault has not been resolved, escalate an ASIST concern.
Electrical systems - FAULT CODES
47866583_ 02/12/2015
55.12 [55.DTC] / 163