New Holland WorkMaster 50 Service Manual page 222

4. Remove the snap ring (1) from the front and rear of the
drive shaft.
5. Remove the bolts (1) from the drive shaft support bear-
ing.
6. Remove the drive shaft from the front axle input shaft
and drop box output shaft by sliding the two couplers
onto the drive shaft.
7. Attach nylon slings around the front axle and attach
them to a hoist.
8. Lift the tractor with the hoist and place a stand under
the lower portion of the front axle.
9. Remove the power steering hoses (1) from the power
steering tubes.
Front axle system - Powered front axle
47866583_ 02/12/2015
25.1 [25.100] / 13
4
GNIL14TR04359AB
5
GNIL14TR00859AA
6
GNIL14TR04361AA
7
GNIL14TR04362AB