Pattern for application of sealant during installation of Power Take-Off (PTO) cover, final drive housing
• Check the backlash with the help of dial gauge.
Permissible backlash is 0.180 - 0.230 mm (0.007 -
0.009 in), if it is less than tighten left-hand side ring
nut after slightly loosening right-hand side ring nut.
• If it is more than 0.180 - 0.230 mm (0.007 - 0.009 in)
then first loosen left-hand side ring nut and then
tighten right-hand side ring nut.
Rear axle system - Rear bevel gear set and differential
GNIL14TR04259GA
and mechanical lift housing.
47866583_ 02/12/2015
27.2 [27.106] / 13
1