New Holland WorkMaster 50 Service Manual page 203

Drive shaft - Install
1. Tighten the bolts (1) on the center mounting bracket of
the Four-Wheel Drive (4WD) shaft.
2. Engage the spline coupler (2), figure 1, on the Power
Take-Off (PTO) shaft of the front axle and the 4WD
shaft.
3. Push the 4WD shaft (1) toward the front axle.
Four-Wheel Drive (4WD) system - Drive shaft
GNIL15TR01128FA
47866583_ 02/12/2015
23.1 [23.314] / 4
1
2
GNIL15TR01129AA
3
GNIL15TR01130AA