Driven shaft - Inspect
1. Wash all parts in a suitable cleaning solution and allow
to air dry.
2. Inspect the bearing for excess wear, score marks, dis-
coloration from overheating or other damage. Rotate
the bearing by hand and check for any roughness while
turning. Replace as necessary.
3. Inspect all the gears and driven shaft for excess wear
chipped gear teeth cracks or any other damage. Re-
place as necessary.
4. Inspect synchronizer ring spring loaded poppet valve
dog for wear.
Transmission - Gearbox internal components
47866583_ 02/12/2015
21.4 [21.145] / 22