Mechanical service brakes - Remove
To remove brake assembly, rear axle assembly has to
be removed from the transmission.
1. Remove the pin (1) and disconnect the brake linkage.
2. Wrap chain around final drive housing and loosen bolts
(1). Remove the final drive housing.
3. Place the trumpet housing assembly on plane surface.
4. Remove the linkage (1).
Brakes and controls - Mechanical service brakes
47866583_ 02/12/2015
33.1 [33.120] / 9
1
GNIL14TR00789AA
2
GNIL14TR04276AB
3
GNIL14TR04336AA
4
GNIL14TR00792AA