New Holland WorkMaster 50 Service Manual page 380

Brake control pedals and shafts - Adjust
1. Measure free play of the brake pedals as shown in 1
and should be 50.00 - 55.00 mm (1.97 - 2.17 in). With
the brake pedals locked together, the tractor should
stop in a straight line when brakes are applied.
2. Adjustment is made to the brake pull rods beneath the
tractor. Block the wheels, front and rear, unlock the
brake pedals and release the parking brake lever. Re-
lease locking clamp, loosen locknut (1) and rotate the
yoke (2) clockwise to reduce the play and anti-clock-
wise to increase the play figure 2.
3. Repeat the same procedure for the left brake pull rod.
4. Lock the brake pedals together and road test to ensure
that the brakes are balanced and will stop the tractor
in a straight line. Any further adjustment necessary to
balance the brakes should be carried out on the right
brake.
Brakes and controls - Mechanical service brakes
47866583_ 02/12/2015
33.1 [33.120] / 17
1
GNIL14TR04343AA
2
GNIL14TR00766AA