New Holland WorkMaster 50 Service Manual page 228

Four-Wheel Drive (4WD) axle - Disassemble
WARNING
Avoid injury!
Handle all parts carefully. Do not place your
hands or fingers between parts. Use Personal
Protective Equipment (PPE) as indicated in this
manual, including protective goggles, gloves,
and safety footwear.
Failure to comply could result in death or seri-
ous injury.
1. Remove plug (1) and drain the oil from the axle cas-
ing.
2. To drain the final drive oil, remove plug (1) on the
left-hand final drive casing.
3. Repeat the same operation on the right-hand side
casing.
4. Remove the rear support (1) off the front axle.
5. Remove the front support and the thrust washer.
Front axle system - Powered front axle
W0208A
47866583_ 02/12/2015
25.1 [25.100] / 19
1
GNIL14TR04367AA
2
GNIL14TR04368AB
3
GNIL14TR04369AB
4
GNIL14TR04370AB