New Holland WorkMaster 50 Service Manual page 136

5. Remove the snap ring (2) securing the reverse drive
gear.
6. Remove the reverse drive gear (1) from drive shaft.
7. Unscrew the reverse intermediate gear shaft locking
screw (1) with a screw driver (2).
8. Remove the idler gear (3).
9. Remove the spacer (1), needle bearing (2), and re-
verse intermediate gear pin (3), along with reverse in-
termediate gear (4).
10. Remove the snap ring (1) securing the driven shaft
bearing.
Transmission - Mechanical transmission
47866583_ 02/12/2015
21.1 [21.114] / 19
4
GNIL14TR04147AB
5
GNIL14TR04135AB
6
GNIL14TR04136AB
7
GNIL14TR04137AB