New Holland WorkMaster 50 Service Manual page 111

Clutch control mechanism - Remove
WARNING
Avoid injury!
Handle all parts carefully. Do not place your hands or fingers between parts. Use Personal Protec-
tive Equipment (PPE) as indicated in this manual, including protective goggles, gloves, and safety
footwear.
Failure to comply could result in death or serious injury.
It is necessary to split the tractor between engine and
transmission housing to gain access to the clutch.
1. Loosen the set screw (1) from fork.
2. Pull out the cross shaft (2).
3. Remove clutch release fork (3).
4. Slide out the clutch release bearing (1).
5. Loosen the bolts 3 numbers as shown in figure.
Clutch - Clutch and components
47866583_ 02/12/2015
18.2 [18.110] / 18
W0208A
1
GNIL14TR04679AB
2
GNIL14TR04680AB
3
GNIL14TR04681AA