Steering cylinder - Remove – 2WD
1. Stand the tractor on a hard level surface and position
the front wheel in the straight ahead position.
2. Disconnect flexible pipes, cap the open pipe ends and
remove hose clamps.
NOTE: Position of flexible pipes and orientation of connec-
tors must be the same upon re-assembly.
3. Remove the nut securing the cylinder rod ball joint to
the steering arm and separate the joint, 1.
4. Remove the nut securing the steering cylinder on front
axle beam.
5. Remove the steering cylinder from the tractor and re-
trieve washer, spacer and bolt (pivot pin).
Steering - Cylinders
1
GNIL14TR04545FB
47866583_ 02/12/2015
41.4 [41.216] / 3