New Holland WorkMaster 50 Service Manual page 141

10. Install all the shift rails shift gates and shift forks after
installing the springs (1) and detent balls (2).
11. Install all roll pins to shift rails along with springs and
detent balls.
NOTE: Install the detent balls and springs where shown
(1) and (2). Insert the Hi/Low rail detent ball and spring (3)
where shown (4). Install the plug (5) above the Hi/Low rail
detent ball and spring at (4).
12. Install the Power Take-Off (PTO) shaft (1).
Transmission - Mechanical transmission
47866583_ 02/12/2015
21.1 [21.114] / 24
8
GNIL14TR04148AB
9
GNIL14TR04149AB
10
GNIL14TR04150AB