Transmission control levers - Install
Assemble the levers in the cover plate and reinstall the
cover plate on the transmission housing. Observe the
following.
1. Inspect the rubber boot (1) for cracks or damage, re-
place if necessary.
2. Reinstallation follows the removal procedure in re-
verse, from step 7 back to step 1.
3. Before fixing cover plate, thoroughly clean and
degrease mating surface and apply a 2.000 mm
(0.079 in) bead of sealant following the pattern shown
in 2
4. Torque the bolts to the correct value.
Transmission - Mechanical transmission external controls
GNIL14TR04099FB
47866583_ 02/12/2015
21.2 [21.130] / 8
2
1
GNIL14TR00785AA