New Holland WorkMaster 50 Service Manual page 213

• Pivoting angle/oscillation (on either side)
• Center pivot and support end float
• Maximum wear clearance
• Center pivot diameter
• Center pivot front bushing fitted
• Center pivot working clearance in bushing
• Rear bevel pinion carrier spigot
• Rear bushing fitted
• Spigot fitted clearance in bushing
Axle front and rear thrust washer thickness
Turning radius
• Turning radius with brakes
• Turning radius without brakes
Turnaround diameter
• Turnaround diameter with brakes
• Turnaround diameter without brakes
Maximum axle steering angle
Camber angle
Caster angle
Tire sizes
• Front 4WD
• Rear 4WD
Front axle system - Powered front axle
47866583_ 02/12/2015
25.1 [25.100] / 4
11 °
0.3 mm (0.0118 in) - 1.1 mm (0.0433 in)
2 mm (0.0787 in)
52.652 mm (2.0729 in) - 52.671 mm (2.0737 in)
52.720 mm (2.0756 in) - 52.790 mm (2.0783 in)
0.049 mm (0.0019 in) - 0.138 mm (2.0783 in)
99.040 mm (3.8992 in) - 99.72 mm (3.9260 in)
99.146 mm (3.9034 in) - 99.221 mm (3.9063 in)
0.074 mm (0.0029 in) - 0.181 mm (0.0071 in)
4.95 mm (0.1949 in) - 5.00 mm (0.1969 in)
4200.0 mm (165.4 in)
4850.0 mm (190.9 in)
8720.0 mm (343.3 in)
10020.0 mm (394.5 in)
62 °
1 °
2 °
9.5 x 24
R4 12.5x18
14.9 x 28
R4 18.4x24