New Holland WorkMaster 50 Service Manual page 173

21. Insert the detent ball (1) in front of the spring.
22. Insert the spring (1) into the clutch housing.
23. Install the shuttle detent bolt to the left-hand side of
the clutch housing.
24. Insert the pin and spring (1) to shuttle cable (2).
25. Insert the shuttle cable (1) through the hole on the
left-hand side of the clutch housing.
Transmission - Gearbox internal components
47866583_ 02/12/2015
21.4 [21.145] / 10
9
GNIL14TR04219AB
10
GNIL14TR04220AB
11
GNIL14TR04221AB
12
GNIL14TR04222AB