New Holland WorkMaster 50 Service Manual page 525

Installation of lip seal
CAUTION
Pinch hazard!
Always use suitable tools to align mating parts.
DO NOT use your hand or fingers.
Failure to comply could result in minor or mod-
erate injury.
1. Insert the head and piston on rod-screw self locking
nut at torque (Nm). Grease every seal on body, head
and piston. Grease the internal wall of body ( 20.00 -
30.00 mm (0.79 - 1.18 in)) entrance zone.
2. Insert the assembled rod. Taking care to not damage
piston seal. Hammer the rod to end of stroke. Unscrew
the rod bell and screw on the other side.
3. Insert the head manually up to 20.00 - 30.00 mm (0.79
- 1.18 in) inside.
Steering - Cylinders
C0044A
47866583_ 02/12/2015
41.4 [41.216] / 8
15
GNIL14TR04560AA
16
GNIL14TR04561AA
17
GNIL14TR04562AA