Joystick and Electric Hydraulic (EH) control - Remove
1. 1. Loosen the locknut on joystick cable.
2. Loosen the set screws on the connectors of joystick
cable.
3. Slide the connector on the joystick cable.
2. Remove the roll pin (1) and remove the joystick cable.
3. Similarly remove the other joystick cable.
4. Loosen the screws (1) and remove the cover (2) of the
joystick.
Electrical systems - Cab controls
47866583_ 02/12/2015
55.11 [55.512] / 3
1
GNIL14TR00764AA
2
GNIL14TR00821AA
3
GNIL14TR00788AA
4
GNIL14TR00786AA