New Holland WorkMaster 50 Service Manual page 167

5. Remove the shuttle detent bolt from the left-hand side
of the clutch housing.
6. Remove the spring (1) from the hole in the clutch hous-
ing.
7. Remove the detent ball (1) from the hole in the clutch
housing.
8. Remove the roll pin (1) aligning the shaft link rod (2)
and lever link rod (3).
9. Slide the shaft link rod (2) out from the lever link rod
(3) and remove the shaft link rod (2) from the cluster
housing.
10. Remove the lever link rod (3) from the shift fork (4).
11. Remove the O-rings from the shaft link rod (2).
Transmission - Gearbox internal components
47866583_ 02/12/2015
21.4 [21.145] / 4
4
GNIL14TR04199AB
5
GNIL14TR04200AB
6
GNIL14TR04201AB
7
GNIL14TR04202AB