New Holland WorkMaster 50 Service Manual page 349

One-speed rear Power Take-Off (PTO) - Disassemble
1. Remove the hydraulic lift assembly, PTO external con-
trol and PTO cover. See Rear mechanical control -
Remove (31.101).
2. Remove the PTO input shaft cover. Remove the PTO
coupler (1). Remove the bearing (2). Remove the PTO
drive shaft assembly (3) from the PTO rear cover.
3. Remove the Power Take-Off (PTO) driven shaft along
with gear (1) and take out bearing (2) if necessary.
NOTE: Gear is the integral part of Power Take-Off (PTO)
shaft in single speed Power Take-Off (PTO)
Power Take-Off (PTO) - One-speed rear Power Take-Off (PTO)
47866583_ 02/12/2015
31.2 [31.110] / 4
1
GNIL14TR00768AA
2
GNIL14TR04324AB