New Holland WorkMaster 50 Service Manual page 661

6. Allow the compound to cure, then cover the area with
insulating tape taking the tape well over each end of
the repair. An overlap of at least 50.00 mm (1.97 in) of
tape at each end is necessary, figure 4.
7. Check to ensure the repair is satisfactory and secure
the repaired cable so that repeat damage is avoided.
NOTE: This is a temporary repair only. Ensure the dam-
aged cable is replaced as soon as possible to prevent
ingress of water or chemicals.
Electrical systems - Harnesses and connectors
47866583_ 02/12/2015
55.4 [55.100] / 96
4
GNIL14TR04714AA