New Holland WorkMaster 50 Service Manual page 408

Main lift system - Install
CAUTION
Pinch hazard!
Always use suitable tools to align mating parts. DO NOT use your hand or fingers.
Failure to comply could result in minor or moderate injury.
Refit the hydraulic lift on the transmission housing as
follows.
1. Re-installation follows the removal procedure in re-
verse
2. Before refitting the hydraulic lift in the rear transmission
casing, clean and degrease the mating surfaces thor-
oughly and apply a strip of sealing compound of about
2.00 mm (0.08 in) diameter as shown in the figure.
3. Apply the torque settings.
Hydraulic systems - Main lift system
47866583_ 02/12/2015
35.2 [35.100] / 13
C0044A
1
GNIL14TR04609AA