Table of Contents
Advertisement
4. Assemble spool and sleeve.
NOTE: When assembling spool and sleeve, only two pos-
sible ways of positioning the spring slots are correct.
There are three slots in the spool and three holes in
the sleeve in the end of the spool/sleeve, opposite to
the end with speing slots. Place the slots and holes
opposite each other so that parts of the holes in the
sleeve are visible through the slots in the spool.
5. Press the springs together and push the neutral posi-
tion springs into place in the sleeve.
6. Line up the springs and centre them.
Steering - Hydraulic control components
47866583_ 02/12/2015
41.2 [41.200] / 13
4
GNIL14TR04511AA
5
GNIL14TR04512AA
6
GNIL14TR04513AA
7
GNIL14TR04514AA
Hide quick links:
Advertisement
Chapters
Table of Contents
