New Holland WorkMaster 50 Service Manual page 134

13. Loosen the bolt (1) as shown in figure before separat-
ing the transmission housing from clutch housing.
14. Separate the clutch and transmission housing.
15. Wrap chain or nylon rope on the final drive housing
and connect it to a hoist. Loosen the attaching bolts
and remove the final drive housing.
16. Repeat for the final drive housing on the other side.
17. Loosen the bolts securing hydraulic housing on trans-
mission housing and lift the housing using suitable
hoist.
18. Place transmission housing on a suitable stand.
Transmission - Mechanical transmission
47866583_ 02/12/2015
21.1 [21.114] / 17
11
GNIL14TR04024AB
12
GNIL14TR04128AA
13
GNIL14TR04026AA
14
GNIL14TR04027AA