New Holland WorkMaster 50 Service Manual page 108

Clutch - Assemble
Re-assembly follows disassembly procedure in reverse
order. See Clutch - Disassemble (18.110) .
1. Position disc springs (1) correctly and lock-ring (2) on
transmission pressure plates as shown in 1.
2. Use special tool number 380000612, and centralize the
clutch discs.
3. Install the clutch assembly on flywheel.
4. Adjust the release fingers as described under clutch
release finger settings. See Clutch - Adjust (18.110).
Clutch - Clutch and components
47866583_ 02/12/2015
18.2 [18.110] / 15
1
GNIL14TR04706AB