New Holland WorkMaster 50 Service Manual page 135

Mechanical transmission - Disassemble – Intermediate plate
WARNING
Heavy objects!
Lift and handle all heavy components using lifting equipment with adequate capacity. Always support
units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders.
Failure to comply could result in death or serious injury.
CAUTION
Pinch hazard!
Always use suitable tools to align mating parts. DO NOT use your hand or fingers.
Failure to comply could result in minor or moderate injury.
To remove the intermediate plate and reverse gear.
1. Remove Power Take-Off (PTO) shaft (1).
2. Remove all roll pins from gear rails to make dismantling
easy. Remove the springs and balls.
NOTE: Remove plug (1), from housing as shown at (2),
from where Hi/Low rail passes, retrieve spring and ball (3)
of Hi/Low rail. Retrieve balls and springs from location (4)
and (5).
3. Remove the springs (1) and balls (2), with the help of a
magnetic tool.
4. Remove all the rails and take out gates, forks.
NOTE: Bring all the gears neutral position to remove rails
and retrieve balls from crown side.
Transmission - Mechanical transmission
47866583_ 02/12/2015
21.1 [21.114] / 18
W0398A
C0044A
1
GNIL14TR04150AB
2
GNIL14TR04132AB
3
GNIL14TR04133AB