New Holland WorkMaster 50 Service Manual page 298

8. Place the wedges at front and back on both sides of
front tires.
9. Jack up rear axle of the tractor and place two suitable
stands under transmission housing to raise the wheels
off the ground.
10. Drain oil from the transmission housing.
11. Remove both left and right-hand side wheels.
12. Loosen the bolts and remove fenders from both sides.
Rear axle system - Rear bevel gear set and differential
47866583_ 02/12/2015
27.2 [27.106] / 9
8
GNIL14TR00564AA
9
GNIL14TR04252AA
10
GNIL14TR00790AA