New Holland WorkMaster 50 Service Manual page 436

Remote control valve - Remove
WARNING
Escaping fluid!
Lower the three-point hitch to the ground and relieve all pressure from the hydraulic system before
installing the kit.
Failure to comply could result in death or serious injury.
1. Loosen the set screw and remove the remote control
valve lever.
2. Remove the two circlip (1) and (2) from position control
lever. Remove the position control lever (3).
3. Loosen the two bolts (1) and remove the quadrant (2).
4. Loosen the bolts (1) and remove the draft control lever
(2).
Hydraulic systems - Remote control valves
47866583_ 02/12/2015
35.4 [35.204] / 3
W1114A
1
GNIL14TR00646AA
2
GNIL14TR00647AA
3
GNIL14TR00648AA