Clutch - Remove
WARNING
Avoid injury!
Handle all parts carefully. Do not place your hands or fingers between parts. Use Personal Protec-
tive Equipment (PPE) as indicated in this manual, including protective goggles, gloves, and safety
footwear.
Failure to comply could result in death or serious injury.
It is necessary to split the tractor between engine and
transmission housing to gain access to the clutch.
1. Remove the bolts (1).
2. Separate the transmission housing from engine. See
engine removal section.
3. Remove the bolts (1) which retains the clutch assem-
bly to the engine fly wheel and slacken the two remain-
ing bolts.
4.
Insert centralizing pin special tool number
380000612 in clutch plate shaft seats back off the two
remaining bolts.
5. Remove the assembly completely.
6. Retrieve the Power Take-Off (PTO) clutch disc.
Clutch - Clutch and components
47866583_ 02/12/2015
18.2 [18.110] / 9
W0208A
1
GNIL14TR00753AA
2
GNIL14TR00754AA