Drive shaft - Remove
1. Loosen the bolts (1) on both the ends of the Four-Wheel
Drive (4WD) shaft guard and remove the 4WD shaft
guard.
NOTE: The drive shaft guard can be separated into two
sections.
2. Unseat the retaining rings (1) and (2). Slide the splined
couplers (3) and (4) toward the center mounting bracket
of the 4WD shaft.
3. Remove the two mounting bolts (1) from center mount-
ing bracket of the 4WD shaft.
4. Remove the 4WD shaft (2).
5. Inspect splines of shaft, coupler and condition of bore
of center support housing for wear or damage.
Four-Wheel Drive (4WD) system - Drive shaft
47866583_ 02/12/2015
23.1 [23.314] / 3
1
GNIL14TR00823AA
2
GNIL15TR01128FA
3
GNIL15TR01129AA