New Holland WorkMaster 50 Service Manual page 320

Final drive housing - Disassemble
WARNING
Avoid injury!
Handle all parts carefully. Do not place your hands or fingers between parts. Use Personal Protec-
tive Equipment (PPE) as indicated in this manual, including protective goggles, gloves, and safety
footwear.
Failure to comply could result in death or serious injury.
1. Remove the pin (1) and disconnect the brake linkage.
2. Loosen the bolts and remove the rear wheel.
3. Loosen the bolts and remove fender.
Rear axle system - Planetary and final drives
47866583_ 02/12/2015
27.3 [27.120] / 5
W0208A
1
GNIL14TR00789AA
2
GNIL14TR00866AA
3
GNIL14TR00790AA