New Holland WorkMaster 50 Service Manual page 112

6. Unscrew bolts as shown in figure and remove top cover
(1).
7. Remove lock (1) as shown in figure. Use plastic ham-
mer to push out the shaft. The shaft will come out to-
ward gearbox side. Retrieve bearing.
8. To remove shaft (2) toward the clutch side, remove cir-
clip lock (1). Retrieve bearing and seal.
9. Use special tool number 84261387 and install the seal
(1).
Clutch - Clutch and components
47866583_ 02/12/2015
18.2 [18.110] / 19
4
GNIL14TR04682AB
5
GNIL14TR04683AB
6
GNIL14TR04684AA
7
GNIL14TR04685AB