New Holland WorkMaster 50 Service Manual page 340

Rear mechanical control - Remove
PTO shaft assembly
1. Remove hydraulic lift assembly by following the proce-
dures given in Main lift system - Remove (35.100).
2. Disconnect the PTO RPM sensor electrical connection.
Loosen the bolts (1) and remove the PTO RPM sensor.
3. Loosen the bolts (1) securing PTO rear cover to the
differential housing.
4. Remove the PTO shaft assembly rear cover. Remove
the PTO engaging coupler (1) and retrieve PTO en-
gage, disengage pad.
PTO levers and internal linkages
CAUTION
Avoid injury!
Handle all parts carefully. Do not place your hands or fingers between parts. Use Personal Protec-
tive Equipment (PPE) as indicated in this manual, including protective goggles, gloves, and safety
footwear.
Failure to comply could result in minor or moderate injury.
Power Take-Off (PTO) - Rear mechanical control
47866583_ 02/12/2015
31.1 [31.101] / 7
1
GNIL14TR00743AA
2
GNIL14TR00741AA
3
GNIL14TR00742AA
C0145A