New Holland WorkMaster 50 Service Manual page 500

Assembly pattern for standard bearing
1. Outer bearing race
2. Needle bearing
3. Inner bearing race
4. Spool
5. Sleeve
*The inside chamfer on the inner bearing race must face
the inner spool.
Installation of O-ring
1. Turn the steering unit until the bore is horizontal in po-
sition. Guide the outer part of the assembly tool into
the bore for the spool/sleeve.
Steering - Hydraulic control components
47866583_ 02/12/2015
41.2 [41.200] / 15
11
GNIL14TR04518AB
12
GNIL14TR04519AA