New Holland WorkMaster 50 Service Manual page 304

4. Lift the cover (1) as shown to get access to differential
gears.
5. Remove the locking pin (1) locking the differential gear
pivot pin.
6. Remove the pivot pin (1) and withdraw the side gears
from the differential housing along with trust washer.
NOTE: Four differential gear (1) and side gear (2) have
thrust washers with same thickness.
Rear axle system - Rear bevel gear set and differential
47866583_ 02/12/2015
27.2 [27.106] / 15
4
GNIL14TR04263AB
5
GNIL14TR04264AB
6
GNIL14TR04265AB
7
GNIL14TR04266AB