New Holland WorkMaster 50 Service Manual page 410

Draft sensing unit - Disassembly
6. Loosen set screws (1).
7. Disassemble roller (2), springs (3), cover (4), flange (5)
from the sensing unit.
Rear lift internal controls removal
8. Remove the lift assembly from the transmission hous-
ing and fix on a rotary stand. See Main lift system -
Remove (35.100).
9. Loosen the set screws (1).
Hydraulic systems - Main lift system
47866583_ 02/12/2015
35.2 [35.100] / 15
4
GNIL14TR04621AB
5
GNIL14TR04642AA
6
GNIL14TR04624AB