5. Support the rear axle on a screw jack.
6. Remove both left and right-hand side wheels.
7. On RH side, loosen two Allen screws, one each on
both the connectors of joystick cable. Loosen two nuts
on joystick connecting cable. Remove connector pipe.
Remove the locking roll pin from the cable and remove
the joystick cable.
8. Loosen bolts securing fenders.
wirings. Remove the fenders.
Platform, cab, bodywork, and decals - Fenders and guards
Disconnect all the
47866583_ 02/12/2015
90.3 [90.116] / 4
4
GNIL14TR00765AA
5
GNIL14TR04016AB
6
GNIL14TR00764AA
7
GNIL14TR00790AA