New Holland WorkMaster 50 Service Manual page 143

9. Install the operator's seat onto the hydraulic housing.
Connect the wiring.
10. Connect all the hydraulic lines.
11. Install the ROPS to the axle housings. Secure using
the bolts and nuts (1).
12. Install the rear fenders (1).
13. Install both left-hand and right-hand side wheels (1).
14. Remove the jack stands (1) and splitting trolley (2).
15. Install the three point linkages (1) to the tractor.
Transmission - Mechanical transmission
47866583_ 02/12/2015
21.1 [21.114] / 26
5
GNIL14TR04021AB
6
GNIL14TR04017AB
7
GNIL14TR00790AA
8
GNIL14TR04159AB