New Holland WorkMaster 50 Service Manual page 140

5. Secure the driven shaft bearing with the snap ring (1).
6. Install the spacer (1), needle bearing (2) and reverse
intermediate gear pin (3) along with the reverse inter-
mediate gear (4).
7. Use thread locker L
OCTITE
intermediate gear (1) shaft screw.
8. Install the reverse drive gear (1) onto the drive shaft.
9. Secure the reverse drive gear (1) with the snap ring (2).
Transmission - Mechanical transmission
® 243™ for locking reverse
47866583_ 02/12/2015
21.1 [21.114] / 23
4
GNIL14TR04144AB
5
GNIL14TR04145AB
6
GNIL14TR04146AB
7
GNIL14TR04147AB