New Holland WorkMaster 50 Service Manual page 224

Tier 4b (final)
Hide thumbs Also See for WorkMaster 50:
Table of Contents

Advertisement

Four-Wheel Drive (4WD) axle - Remove
WARNING
Heavy objects!
Lift and handle all heavy components using lifting equipment with adequate capacity. Always support
units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders.
Failure to comply could result in death or serious injury.
Proceed as follows:
NOTE: The front axle assembly can be removed from the
tractor either with or without previously removing the drive
shaft. The description below refers to removal of the front
axle with the drive shaft installed on the tractor.
1. Disconnect the negative battery lead (1).
2. remove the front weights (1).
3. Remove the bolts (1), and remove the drive shaft
guards (2).
Front axle system - Powered front axle
47866583_ 02/12/2015
25.1 [25.100] / 15
W0398A
1
GNIL14TR00784AA
2
GNIL14TR00829AA
3
GNIL14TR00859AA

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workmaster 60Workmaster 70

Table of Contents