New Holland WorkMaster 50 Service Manual page 325

20. Remove planet carrier sub assembly (1).
21. Check planet gear spacers and needle bearings for
damage, replace if found worn out.
22. Hammer the wheel axle shaft out of the final drive
housing.
23. Retrieve the taper roller bearing.
NOTE: Ball bearings are fitted in low duty trumpet housing.
Rear axle system - Planetary and final drives
47866583_ 02/12/2015
27.3 [27.120] / 10
20
GNIL14TR04285AB
21
GNIL14TR04286AA
22
GNIL14TR04287AA
23
GNIL14TR04288AA