New Holland WorkMaster 50 Service Manual page 180

Drive shaft - Disassemble
1. Remove the snap ring (1) from the drive shaft to remove
the hub along with coupler.
2. Remove the snap ring (1) from the drive shaft. Remove
the 3rd drive gear (2).
NOTE: 1st and 2nd gear are a integral part of the drive
shaft.
Transmission - Gearbox internal components
47866583_ 02/12/2015
21.4 [21.145] / 17
1
GNIL14TR04179AB
2
GNIL14TR04180AA
3
GNIL14TR04181AB