25. Remove the lift arm from the shaft.
NOTE: Before removing lift arm punch a mark (1) on both
lift arm and shaft to facilitate the assembly in original posi-
tion.
26. Repeat the same for the other side lift arm.
27. Remove the locking sensor (1) locking crank and
shaft.
28. Push the shaft from left-hand side towards right-hand
side by hammering gently using aluminium or copper
rod.
Hydraulic systems - Main lift system
47866583_ 02/12/2015
35.2 [35.100] / 20
23
GNIL14TR04644AB
24
GNIL14TR04645AB
25
GNIL14TR04646AA